Termo 85 VS and VP
The TERMO 85 VS AND VP system is intended for the production of entrance doors and consists of groups:
- Termo 85 VS opening outwards (entrance doors with a glass filling)
- Termo 85 VS opening inwards (entrance doors with a glass filling)
- Termo 85 VS opening inwards (entrance doors with a panel filling)
The system allows the execution of various schemes:
- single-wing doors
- single-wing doors with a lateral fixed part
- single-wing doors with a fixed and opening transom light
- double-wing doors
- double-wing doors with a lateral fixed part
- double-wing doors with a fixed and opening transom light
It is a system of profiles with a thermal break, with a basic installation frame depths of:
- 85 mm – Termo 85 VS opening outwards and inwards; Termo 85 VP
- 88.5 mm – Termo 85 VP on both sides flat sheet
The thermal break is achieved with polyamide strips of 34 mm for the frame and 30 and 26 mm for the wing. In order to further improve the thermal characteristics of the profile, profiled XPS rods (extruded polystyrene – ʎ = 0.035 W/m2K) are installed in the profile chambers and such profiles are given the letter F. Sealing was performed with EPDM seals.
Technical characteristics of the system:
- frame depth: 77 and 85 mm
- wing depth: 88 and 88.5 mm
- depth of the filling: up to 71 mm
- polyamide strips: 34 mm (frame); 26 and 30 (wing)
- max. wing weight: 160 kg
- air-permeability: EN 12207 (class 4)
- watertightness: EN 12208 (class E750)
- resistance to wind gusts: EN 12210 (class C5 /B5)
- noise protection: DIN 4109 (Rw=46 dB)
- antiburglary EN 1627 (RC2, RC3)
- Uw coefficient calculation: DIN EN ISO 10077-2 (≥0.94 Wm²/K)
- basic material: EN AW-6060
- polyamide strip material: PA66 GF25
- sealing material: EPDM
- surface treatment: DIN 17611
- quality control: DIN EN ISO 9001
